Home > News > Content
Products Categories
Contact Us

Shanghai Jiuya Industrial Co.,Ltd

Tel: +86-21-59962316

Mobile: +8613681966981

E-mail: sale@shjiuya.com

Address: No.45, lane 1661, jialuo road, jiading district, Shanghai

Maintenance Methods For Hydraulic Lifts
Nov 13, 2018

1. The brakes of the agencies should be regularly inspected and adjusted for the clearance of brake tiles and brake wheels to ensure flexibility and reliability.

On the friction surface, there should be no dirt, in the event of dirt must be washed off with gasoline or thinners.

2. The lubrication and hydraulic oil of the reducer, gearbox, external meshing gear and other parts are carried out according to the requirements of the lubrication table. 

3. Pay attention to check the steel wire rope has no broken wire and loose stock phenomenon. If the relevant provisions are exceeded, they must be replaced immediately.

The maintenance of wire rope should be strictly in accordance with gb5144-85 regulations. 

4. Check the connection situation of each department frequently, and tighten it if there is loosening.

The body connection bolt shall check the tightness when the body is under pressure (the method of rotating arm can be used to cause the pressure state), all connections must have an opening pin, and need to open fully.

5. Regular inspection of the operation of the agencies is normal, there is no noise, such as fault detection, must be removed in a timely manner.



Related News

Learn More Information About Our Products Know More
Copyright © Shanghai Jiuya Industrial Co.,Ltd All Rights Reserved.